|
Industrial Technology Limited.
|
plastic injection moulding Precision Injection Moulding custom Injection Moulding
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
<span st
Plastic Precision Injection Mould LKM Base For Micro Eyelash Brush
Quick Detail:
1. The part name: Micro eyelash brush(plastic injection mold)
2. Plastic material: PA
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Edge-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO, Customize according to customers' requirements.
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Micro eyelash brush
Mold type: Plastic Injection Mould with cold runner system
Part Material: PA
Locating ring Dimension: 100
KO Pattern: 200*200
Sprue Radius: SR 19
Ejection type: ejection pins.
Mold construction description: cold runner system with edge gate, 2 plates, 2sliders, and many micros inserts and shut off area. Many size tolerances are no more than +/-0.02mm. the brush bristles each line must have a insert for cut cavity steel and be helpful to mold venting,the diameter of the brush bristles is 0.3mm,which is very difficult to cut steel.
This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport, Sliver Marks, Gas Trap Effect, Visible Ejector Marks,Deformation,Short shot Filling, Burnt Streaks, Sink Marks,Flash,Over dimension, Under dimension, Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-2.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Applications:
Molding the plastic product by plastic injection machine
Specifications:
|
1.name |
Micro eyelash brush(plastic injection mold) |
|
Plastic material |
PA,PP,PE,PA,PC,ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
8 |
|
7.runner |
Cold runner |
|
8.gate type |
Edge-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
350 kg |
|
10. mould base standard |
LKM Local standard, DME,HASCO,Customize according to customers' requirements |
|
11.cycle time |
26 second |
